FLIR Flexible Clamp Meters &CM55 & CM57
FLIR CM55 & CM57
Flexible Clamp Meters
The FLIR Flexible Clamp Meters with Bluetooth® are ergonomic tools designed to simplify difficult current measurements. Made with a narrow flexible coil clamp, the CM55 and CM57 let you easily take measurements in tight or awkward spots — a difficult task with a traditional hard jaw clamp meter. With Bluetooth communication for remote viewing and data transfer to iOS® and Android™ devices via the FLIR Tools mobile app, quickly share and analyze data right from the jobsite.
FLIR TA72 & TA74
Universal Flex Current Probe Accessory
The FLIR Universal Flex Current Probe accessories are designed to add capabilities, simplify challenges, and get the best readings with your existing meter. Made with a narrow flexible coil clamp, the TA72 and TA74 let you easily take measurements in tight or awkward spots — a difficult task with a traditional hard jaw clamp meter. The connection is a standard banana plug and the output is a voltage signal, so it’s compatible with most DMMs and clamp meters, regardless of brand.
FLIR CM55 & CM57
Flexible Clamp Meters
The FLIR Flexible Clamp Meters with Bluetooth are ergonomic tools designed to simplify difficult current measurements. Made with a narrow flexible coil clamp they can easily take measurements in tight or awkward spots.
Take accurate measurements in tight or awkward spots
Snake the coil around obstacles with ease, even in deep, crowded cabinets
Tricky conductors conquered
True RMS AC Current up to 3,000 Amps for multiple conductor measurements
Inrush current
Measure hard and soft start-up inrush current spikes while equipment is ramping up
Standalone flexible clamp meter
Displays the readings you need for easy inspection and navigation
Bluetooth Connectivity
Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Multiple units wirelessly connect for remote viewing of multiphase systems. Also, upload data without the need for special cords with FLIR Tools Mobile.
Limited Lifetime Warranty with Registration
Bright, dual LED worklights
Work safely and easily in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets
Drop tested to 3 meters
Portable, lightweight, and tangle-free without compromising measurement range.
FLIR TA72 & TA74
Universal Flex Current Probe Accessory
The FLIR Universal Flex Current Probe accessories are designed to add capabilities, simplify challenges, and get the best readings with your existing meter.
Take accurate measurements in tight or awkward spots
Snake the coil around obstacles with ease, even in deep, crowded cabinets
Tricky conductors conquered
Measure multiple conductors and targets with limited clearance
Switchable AC current range
30A, 300A, 3000A
Compatible with most DMMs and clamp meters
Standard banana plug connectors fit most meters, and AC voltage output enables wide compatibility
Choose from two flexible coil lengths
- TA72 – 10” (25.4cm) for easy maneuverability and compact convenience
- TA74 – 18” (45.72 cm) for larger and multiple conductor measurements, double-wrap requirements, and deeper access
If you’re looking for a standalone flexible clamp meter that can take accurate measurements in tight or awkward spots for easy inspection and navigation, check out the FLIR CM55/57 Flexible Clamp Meters
| Part Number | TA72 | TA74 |
|---|---|---|
| Measurement | ||
| Maximum AC current | 3000A | |
| AC current ranges and resolution | 30.00A, 300.0A, 3000A | |
| Basic AC current accuracy (full scale) | ± 3.0% + 5 digits | |
| Measurement Rate | 1.5 samples per second, nominal | |
| AC current bandwidth | 45Hz – 500Hz (sine wave) | |
| Positional error (distance from optimum) | 0.6″ (15mm) ± 2.0% 1.0″ (25mm) ± 2.5% 1.4″ (35mm) ± 3.0% |
1.4” (35mm) ±1.0% 2.0” (50mm) ±1.5% 2.4” (60mm) ±2.0% |
| Meter Data | ||
| Minimum requirements for meter compatibility with TA72 | AC voltage function 4000 count display 1mV resolution | |
| Max conductor diameter capacity | 2.4″ (6cm) | 4.7″ (12cm) |
| Flex coil length | 10″ (25 cm) | 18″ (45 cm) |
| Flex coil diameter | 0.3” (7.5mm) | |
| Flex coil tip diameter | 0.5” (13mm) | |
| Probe length | 73″ (1.9m) | |
| Work light | Two white LEDs | |
| Power supply | (2) 1.5V “AAA” | |
| Drop test | 9.8′ (3m) | |
| Agency approvals | CE, UL | |
| Safety rating | CAT IV 600V,CAT III 1000V | |
| Standards | EN61010‐1, EN61010‐2‐032, EN61326-1 | |
| Warranty | Limited lifetime with registration | |
Thermal Cameras for Electrical & Mechanical
Electrial/Mechanical InspectionLet FLIR be your power source for detecting safety hazards before they happen.